WOLF Smart IoT Gateway
Wolf Gateway is a modular hardware design with an open-source Linux software that provides great functional flexibility at an unmatched price. It comes with multiple connectivity options like 4G, LTE, NB-IoT, Bluetooth, Wi-Fi, etc.
This is a universal gateway for industrial applications as well as hobby electronics.
*Pictures for illustrative purpose only
POWER SUPPLY
- Input Range 9 to 30VDC
- DC Power Jack 2.1 / 5.5
- Average Power 0.6W @ 12VDC
- Reverse Voltage Protection
SOFTWARE
- FoxIoT Linux Distro and Build System
- FoxIot Bootloader with firmware upgrade support
- Linux Kernel 4.4 and 5.9
- Programming Languages C, C++, Python, Lua, Shell
- OpenWRT
- U-Boot
EXTERNAL INTERFACES
- 10 / 100 Mbps Ethernet RJ45 connector
- Micro-SD card slot (System Boot possibility)
- Presence Detection
- Power reset functionality
- Micro USB 2.0 port (For Firmware Upgrade and USB device functionality)
- USB 2.0 port with 1A supply capability.
- Overcurrent Protection and Detection
- Power reset functionality
- User Button
- 2 x USER LEDs (Yellow and Green)
- Nano SIM (connected to Mini PCIe connector)
- Expansion Board Connector (for hardware extension module)
- 31 GPIO (UARTs, SPI, CANs, I2C, I2S, RMII, SDIO, USBs,
SMARTCARD, PWMs, ADCs) - Please refer to “Documentation” for more details
- 31 GPIO (UARTs, SPI, CANs, I2C, I2S, RMII, SDIO, USBs,
ENVIRONMENT
- Operating Temperature -40 to +75 °C
- Storage Temperature -40 to +75 °C
- Humidity: 5 to 90% (non condensing)
HARDWARE CONFIGURATION
- ARM926EJ-S Processor @ 300 Mhz
- 16 KB I-cache / 16 KB D-cache
- 64 MB DDR II Memory
- 128 MB On-Board NAND Flash
- Cryptography Accelerator (ECC-256, AES-256, RSA-2048, SHA-512, HMAC, Random Number Generator)
- Real-time clock (with battery back-up as an accessory)
- On-Board PCB Temperature Sensor
- Input Voltage Monitoring
INTERNAL INTERFACES
- Mini PCIe connector (only USB 2.0 is supported)
- Intended for communication cards (4G, LTE, NB-IoT, WiFi / Bluetooth)
- Support Quectel and SIMCom UART interface
- Power reset functionality
- On-Board Connector (MX1.25 10P)
- I2C interface
- SPI or UART interface
- 3.3V Power Output
- Power reset functionality
- On-Board Header 2.54 2x6P
- For development (Debug UART interface)
- Boot Source Selection (On-Board NAND Flash, USB, SD card)
- Please refer to “Documentation” for more details